Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 76)

Extended System-Level Command Functions
68
(IL) Imaging Mode – This command instructs the printer whether to pre-image the
label format:
Value
Units /
Interpretation
Imaging Mode Definition
M Multiple Label
The printer images multiple labels as memory
permits, achieving the fastest throughput; however,
if time-stamping, the time will reflect the moment
the label is imaged rather than when actually
printed.
S Single Label
The printer images the next label only after the
previous label has been successfully printed. Single
processing provides time-stamps that are more
accurate, but it slows label throughput time.
(IM) Internal Module – This command sets the number of 1K blocks allocated for
Module D.
(LE) Legacy Emulation – This command enables the O and f print
positioning commands to allow backward compatibility with label formats that were
designed for the Allegro ® Prodigy ® , and Prodigy Plus ® (If the printer is Display-
Equipped, also Prodigy Max ® emulation).

Use causes the printer to ignore Label commands A, M, n, and T.
(LR) Label Rotation – This command sets label rotation, allowing formats to be
flipped 180 degrees.
(LS) Language Select – This command selects the language for the menu system
messages and configuration label. Only languages that are resident will be available.

Language name limited to a twenty character maximum.
(LM) Label Store – This command selects the level of stored format recall to
include the label-formatting command fields, or the label-formatting command fields
and the printer state.