Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 80)

Extended System-Level Command Functions
72
802.11 – Wireless Ethernet - WIFI Configuration Parameters – Identifier
‘WIFI’
The ‘WIFI’ sub-group contains network configuration parameters that apply only
to the Wireless Ethernet (802.11 Specification) ethernet interface. Four (4) sub-
groups are currently defined for the ‘WIFI’ sub-group of configuration parameters
and are as follows:
DO Embedded – Identifier ‘DO1’
The previous subgroups which are not supported:
General WIFI Configuration Parameters – Identifier ‘G’
DPAC Version 1 – Identifier ‘DV1’
DPAC Version 2 (Veyron) – Identifier ‘DV2’
SILEX Version 1 – Identifier ‘SV1’
D-O Embedded WIFI Configuration Parameters – Identifier ‘DO1’
The ‘D01’ WIFI sub-group contains the configuration parameters that are specific
to the D-O WIFI solution that is based on the Green Hills / DeviceScape 802.11
software. The ‘Item-Value’ pairs within the ‘DO1’ sub-group of the ‘WIFI’ sub-
group are defined by the following tables: