Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 65)

Extended System-Level Command Functions
57
(BT) Bluetooth Parameters – This command configures the Bluetooth
Communication parameters.
Syntax:
KcBT[nnn
1
,vvvv
1
:nnn
2
,vvvv
2
:…,nnn
n
,vvvv
n
:];
Where:
nnn
i
,vvvv
i
: Configuration Item – Value pairs
nnn
i
Decimal Item Numbers from 1 to 9999
, Decimal Item Number Delimiter
vvvv
i
Item Value (syntax defined later)
: Item Value Delimitermimitd
Example – Discoverable on, service name is “smartchoice”, Bluetooth name is
“bestprinter”.
KcBT[1,’bestprinter’:2,’smartchoice’:3,1]
Bluetooth parameters are defined by the following table:
Item
Number
Name Available
to User
(Y/N)
Value Type Description
1 Bluetooth Name Y String Bluetooth Device Name
(Friendly Name) 1 to 32
characters. Default ‘Datamax-
Oneil’
2 Bluetooth Service
Name
Y String Bluetooth Service name – 1 to
32 characters. Default
‘Datamax-Oneil’
3 Discoverable or Not Y Boolean Discoverable: yes or no;
Default YES.
0=no
1=yes
4 Connectable or Not Y Boolean Connectable: yes or no;
Default is NO
0=no
1=yes
5 Bondable or Not Y Boolean Bondable: yes or no; Default is
NO.
0=no
1=yes
6 Authentication on Y Boolean Authentication on or off.
Default OFF.
0=no
1=yes
7 Encryption on Y Boolean Encryption on or off. Default
OFF
0=no
1=yes