Extron Electronics Annotator User Guide - Manual (Page 96)

Control Tab
The three pages on the Control tab are User Control, Presets, and PIP Setup, and they
allow limited device configuration.
From the User Control page, the selection and viewing of inputs, mute and freeze
selection, and execution of Auto Image is possible. Picture control and input sampling is
also available on the User Control page.
From the Presets page, up to 16 memory presets and up to 30 input presets can be saved
and recalled.
Using the PIP (picture-in-picture) page, an input can be selected and swapped to become
either the main image or the secondary (PIP) image. In addition, the PIP can be turned off
and auto image can be performed an either input. Within PIP Setup limited picture control
is possible. The Control pages initially open on the User Control page.
User Control page
This page emulates some of the front panel features and displays the current picture
control settings and input sampling data. In addition, image muting or unmuting, image
freezing or unfreezing and Auto Image can be selected.
Figure 54. User Control Page
To select an input to be displayed, click on an input number. The selected input is
displayed.
To mute or unmute, freeze or unfreeze the input image, click on the appropriate
button. Muting the image blanks the display screen. Unmuting the image allows the
image to be displayed.
Freezing the image keeps the same image displayed, even when the input is switched.
Unfreezing the image allows images from switched inputs to be viewed.
Annotator • HTML Operation 90