Extron Electronics Annotator User Guide - Manual (Page 69)

Using the SPPCP
The Signal Processing Products Control Program (SPPCP) is used to configure and operate
the Annotator from the PC on which the program resides.
Orientation
The SPPCP main window has 5 main tabs: Control, I/O Configuration,
Advanced Settings, Image Capture, Font. A sixth tab appears only if a scan
converter or an auxiliary scaler board is installed (aux scaler tab shown in figure 25).
Click on each as desired.
Figure 26. The Control Program Main Window
The menu bar on the main window shows File, Options, Tools, and Help. Click
on each as desired.
At the bottom of the window is the status bar, indicating the status of the connection or
any configuration error messages.
NOTE: For detailed Signal Processing Product Control Program instructions when the
program is open, press or click on Help, Contents.
Annotator • SPPCP 63