Extron Electronics Annotator User Guide User Manual
Page 49
Command
ASCII command
(host to processor)
Response
(processor to host)
Additional description
Input Switching and Configuration
Input selection
Select input
X!
!
In
X!]
Select video from input
X!
.
View current input
!
X!]
View currently selected input source.
Input video format
Set format
X!
*
X#
\
Typ
X!
*
X#]
Set input
X!
to video format
X#
.
View format
X!
\
X#]
View video format of input
X!
.
View detected format
X!
*\
Atyp
X!
*
X#]
View actual video format auto
detected on input
X!
.
Input EDID
Specify an EDID value
EX2!
*
X2@
EDID
}
Edid
X2!
*
X2@]
Set EDID resolution and refresh for
DVI and VGA inputs.
View EDID value
E
EDID
}
X2!
*
X2@]
View EDID resolution and refresh for
DVI and VGA inputs.
NOTE:
Default is to match output:
X2!
=0
X2@
=0
Auto image
Enable auto image
X!
*1A
Img
X!
*1
]
Auto image input
X!
when selected.
Disable auto image
X!
*0A
Img
X!
*0
]
Turn off auto image for input
X!
.
Execute auto image
A
Img
]
Execute auto image for current input.
View auto image
X!
A
X1)]
View auto image setting.
Horizontal start
Specify a value
EX$
HSRT
}
Hsrt
X!
*
X$]
Set horizontal location of first active
pixel in active input.
Increment value
E
+HSRT
}
Hsrt
X!
*
X$]
Increase value.
Decrement value
E
-HSRT
}
Hsrt
X!
*
X$]
Decrease value.
View value
E
HSRT
}
X$]
Show horizontal location of first
active pixel in active input.
Vertical start
Specify a value
EX$
VSRT
}
Vsrt
X!
*
X$]
Set vertical location of first active line
in active input.
Increment value
E
+VSRT
}
Vsrt
X!
*
X$]
Increase value.
Decrement value
E
-VSRT
}
Vsrt
X!
*
X$]
Decrease value.
View value
E
VSRT
}
X$]
Show vertical location of first active
line in active input.
NOTE:
X!
= Input selection; 1 – 7
X#
= Input video format; 1 = RGB (default), 2 = YUVp/HDTV, 3 = RGBcvS, 4 = YUVi, 5 = S-video,
6 = Composite video, 7 = SDI, 8 = HD-SDI, 9 = DVI, 10 = Auto detect
X$
= H/V start; 0 to 255 (default midpoint = 128)
X2!
= Scaler resolution; 1 = 640x480, 2 = 800x600, 3 = 852x480, 4 = 1024x768, 5 = 1024x852,
6 = 1024x1024, 7 = 1280x768, 8 = 1280x800, 9 = 1280x1024, 10 = 1360x765,
11 = 1360x768, 12 = 1365x768, 13 = 1366x768, 14 = 1365x1024, 15 = 1440x900,
16 = 1400x1050, 17 = 1680x1050, 18 = 1600x1200, 19 = 1920x1200, 20 = 480p,
21 = 576p, 22 = 720p, 23 = 1080i, 24 = 1080p, 25 = 2048x1080, 26 = 1080p CVT
X2@
= Output refresh rate; 1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz.
7 = 59.94 Hz, 8 = 60 Hz (default), 9 = 75 Hz.
Annotator • SIS Communication and Control
43