Extron Electronics Annotator User Guide - Manual (Page 21)

•
Freeze — Allows the current displayed image to be frozen or unfrozen as desired.
d
Picture control buttons — These six buttons are:
•
Size — Allows adjustment to the displayed image size.
•
Bright/Cont — Allows adjustment of the brightness and contrast settings for the
displayed image.
•
Detail — Allows adjustment of the detail (sharpness) settings for the displayed
image.
•
Position — Allows horizontal and/or vertical position adjustment of the displayed
image.
•
Color/Tint — Allows adjustment of the color and tint settings for the displayed
image.
•
Zoom/Pan — Allows displayed image to be zoomed in or out, or panned
horizontally and/or vertically.
NOTE: Adjustments are made using either or both Adjust knobs ([ {).
e
LCD display — This LCD screen displays two rows of menu, control response,
and configuration text.
f
Menu navigation buttons — These two buttons give access to menu
commands.
See “The Annotator Menu System” section in this chapter.
•
Menu button — This button, always lit amber, gives direct access to a series of
five menus.
•
Next button — This button, always lit amber, allows page changes within each
one of the menus, and to exit the menu cycle.
g
Adjustment knobs — These two knobs are used with the picture control buttons
and the menu navigation buttons to adjust settings.
Switching Inputs
To switch inputs, simply press the desired input button. The button lights amber when an
active video signal is detected. If the output is configured correctly for the display device,
the image changes to the new input. An inactive signal gives no image.
Button Backlighting
The buttons can be backlit a dimmed amber.
To turn the backlighting on or off, press and hold the Bright/Cont and Color/Tint buttons
simultaneously until the buttons become lit or unlit.
Annotator • Operation 15