Extron Electronics Annotator User Guide - Manual (Page 15)

c
Universal BNC connectors (input 3) — Connect a high resolution computer-
video, component, S-video, or composite input signal to this group of female
BNC connectors.
3 R/
R-Y
G/Y
VID
B /C
B-Y
H/HV V
RGsB/Component Video
(Y, R-Y, B-Y)
3 R/
R-Y
G/ Y
VID
B/ C
B-Y
H/HV V
3 R/
R-Y
G/Y
VID
B/C
B-Y
H/HV V
RGBHV
3 R /
R-Y
G /Y
VID
B /C
B-Y
H /HV V
Composite Video S-video (YC)
RGBS/RGBcvS
3 R /
R-Y
G /Y
VID
B /C
B-Y
H/ HV V
d
Composite/S-video/component BNC connectors (input 4) — Connect a
composite video, S-video, or SD component video signal. Connect cables as
shown below.
Component Video (Y, R-Y, B-Y) Composite Video S-video (YC)
4
R-Y B-Y
/C
VID
/Y
VID
/Y
4
R-Y B-Y
/C
VID
/Y
4
R-Y B-Y
/C
e
S-video/composite video BNC connectors (input 5) — Connect S-video or
composite video input signals to this pair of female BNC connectors. Connect
cables as shown below.
5 VID
/Y
Composite Video S-video (YC)
5 VID
/Y
C C
f
DVI-D connector (input 6) — Connect a high resolution digital input signal to
this DVI-I connector.
g
Optional input board (HD-SDI/SDI with BNC shown) connector (input 7)
— Connect an appropriate input to the optional board connector.
Output, User Interface, and Control Connections
h
RGB/YUV-HD BNC connectors — Connect a display to these for RGB or
HD component video output.
i
RGB/YUV-HD 15-pin VGA connector — Connect a display to this for RGB or
HD component video output.
j
Optional output card (scan converter with BNC connectors shown) —
Connect a display to this for composite, S-video, or component video output.
k
MTP output — Connect a mini twisted pair receiver to this port
NOTE: MTP output supports only RGBHV and RGBS video formats.
Annotator • Rear Panel Features and Connections 9