On screen annotation, Usb and rs-232 driver configuration, Usb driver configuration – Extron Electronics Annotator User Guide User Manual
Page 36: See the
On Screen
Annotation
This section of the manual discusses on screen annotation and is in four sections:
•
USB and RS-232 Driver Configuration
•
•
•
The Annotator is a high performance, hardware-based annotation processor for video and
computer-video sources. Annotating over motion video or still images is possible using
common touchscreen panels, and a standard keyboard and/or mouse. The touchscreen
panels can be connected by RS-232 or USB, and device drivers can be uploaded to ensure
compatibility with the Annotator. For a full list of compatible panels visit
.
Contact Extron if the device you wish to use is not listed.
USB and RS-232 Driver Configuration
USB and RS-232 driver configuration is possible using the Signal Processing Products
Control Program. The Device Module Configuration option allows you to configure a
touchpanel so that it can be used with the Annotator.
Connect a touchpanel device to either of the USB ports or, using a NULL RS-232 cable
only, connecting the touchscreen to either of the two rear panel RS-232 ports.
USB Driver Configuration
To load a touchpanel driver:
1.
Open the SPPCP program on a PC connected to the Annotator by an IP connection.
2.
From the
Tools
menu, select
Device Module Configuration...
. This opens the
Device Module Manager window.
Figure 19.
Device Module Manager Window
Annotator • On Screen Annotation
30