Extron Electronics Annotator User Guide - Manual (Page 80)

Scan Converter Tab
NOTE: The Scan Converter tab appears only if the optional scan converter
output board is installed in the Annotator.
The Scan Converter tab allows viewing and changing of the configuration settings of
the optional scan converter output board.
Figure 40. The Scan Converter Tab Screen
• Picture Adjustments — The Picture Adjustments and Image Filter sections of the
Scan Converter tab allows adjustments to be made to the image settings of the
scan converted output. Adjustable image settings are: Horizontal Center,
Vertical Center, Horizontal Size, and Vertical Size. Change the
value field (from 0 to 4095) as required. In addition the Image Filter settings (flicker,
horizontal detail, and encoder sharpness) can be set as desired from each drop-down
list.
• Output Config — In this section the output standard (PAL or NTSC) and the format
of the scan converted output (S-video/composite, YUVi, or RGsB) can be set. Select
the applicable standard and format as desired.
Annotator • SPPCP 74