Extron Electronics Annotator User Guide - Manual (Page 75)

To download and install the Firmware Loader application:
1. Go to www.extron.com .
2. Enter “ Firmware Loader ” in the Search field and press Enter.
3. Locate the Firmware Loader application in the results and click Download Now!
4. Follow the on-screen prompts to complete the download.
To update the firmware:
1. From the SPPCP Tools menu, select Update Firmware. The SPPCP minimizes
and the Firmware Loader application opens.
NOTE: For full instructions about using the Firmware Loader, click Help >
Help (or ) on the open Firmware Loader window
2. In the Firmware loader window, click File > New Firmware for Selected
Devices. A dialog box opens to enable a search for the device-specific firmware file
(with the file extension “.S19”) that has been downloaded to the connected PC.
Figure 33. Firmware Loader Main Window
3. In the dialog box, browse to the file location. Click on the file then click Open.
The dialog box closes, and the file name appears in the Firmware Loader window.
Figure 34. Choosing Firmware File Window
4. Click Begin. The file uploads to the Annotator and the upload progress can be seen
on the Total Progress bar.
Annotator • SPPCP 69