Extron Electronics Annotator User Guide - Manual (Page 48)

X2% = User presets — 1 to 16
X2^ = Input presets — 1 to 128
X2* = On-screen menu time-out — 1 to 64, in 1 second increments,
0 = always displayed (default = 10)
X3& = RGB delay — 0 to 50, in 0.1 second increments (default is 05 = 0.5 seconds)
X4) = Video mute — 01 = mute to black, 02 = mute to white,
00 = unmute (restore image)
X5) = Annotation type:
0 = eraser 7 = rectangle
1 = pointer 8 = text tool
2 = freehand 9 = spotlight
3 = highlighter 10 = zoom tool
4 = vector line 11 = pan tool
5 = arrow line (arrow appears at the endpoint of the vector)
6 = ellipse
X5! = Font selection — 16 character file name including *.FNT extension,
0 = default font (Arial)
X5@ = Font size — 8 to 63 point font (default = 8 pt)
X5# = Line color — 6 bit RGB, 64 total colors
000000 = Black
01 10 11
Red
Value
Green
Value
Blue
Value
Format:
010000 = Dark red (33%)
100000 = Medium red (66%)
110000 = Bright red (100%)
001100 = Bright green (66%)
000011 = Bright blue (default)
111111 = White
010101 = Dark gray (33%)
X5$ = Line weight, eraser, or highlighter width — 1 to 63 pixels wide (default = 8)
X5% = Aspect ratio 1 = Follow, 2 = Fill
X5^ = On-screen clock:
0 = disabled (default)
1 = date and time
2 = time only
3 = date only
X5& = Annotation coordinates — 8 digit number with first four being the X coordinate,
the last four the Y coordinate, limits = 1000,1000. Fixed for any output rate.
Example, (0,0) = 00000000 = top left; (500,500) = 05000500 = screen center.
X7% = Scan converter output format
0 = S-video/composite video
1 = YUVi
2 = RGsB
X7^ = Scan converter output standard
0 = NTSC
1 = PAL
X7& = Scan converter filter level (encoder, horizontal, flicker) — 0 to 3
Annotator • SIS Communication and Control 42