Extron Electronics Annotator User Guide - Manual (Page 88)

Date/Time Settings fields
The Date/Time Settings fields provide a location for viewing and setting the time functions.
Figure 46. Date/Time Settings fields
Change the date and time settings as follows:
1. Click the desired variable’s drop-down box. The adjustable variables are month, day,
year, hours, minutes, AM/PM, and (time) zone. A drop-down scroll box appears.
2. Click and drag the slider or click the scroll up or down buttons until the desired
variable is visible.
3. Click on the desired variable.
NOTE: • If setting the time, set the local time.
• The Zone field identifies the standard time zone that has been selected
and displays the amount of time, in hours and minutes, that the local
time varies from the GMT international time reference.
4. Repeat steps 1 through 3 for other variables that need to be changed.
5. Select the appropriate Daylight Saving radio button. To turn off daylight savings
time, select Off.
NOTE: When daylight saving time is enabled, the unit updates its internal clock
between Standard Time and Daylight Saving Time in the spring and fall on
the date that the time change occurs in the United States of America and
parts of Europe and Brazil. When daylight saving time is turned off, the
unit does not adjust its time reference.
6. Click Submit at the bottom of the Date/Time Settings section to implement your
selections.
NOTE: Click Cancel at any point before submitting to exit any field changes.
The unit is not updated with those changes. The screen refreshes and
shows the current device settings.
Annotator • HTML Operation 82