Extron Electronics Annotator User Guide User Manual
Page 58
Command
ASCII command
(host to processor)
Response
(processor to host)
Additional description
Drop shadow
Enable drop shadow
E
1SHDW
}
Shdw1
]
Enable a drop shadow.
Disable drop shadow
E
0SHDW
}
Shdw0
]
Disable drop shadow.
View setting
E
SHDW
}
X1)]
View current fill setting.
Eraser/highlighter size
Set eraser/highlighter size
EX5$
ERSR
}
Ersr
X5$]
Set the eraser/highlighter size to
X5$
.
View size
E
ERSR
}
X5$]
View current eraser/highlighter size.
Annotation edit functions
Clear all annotations
E
0EDIT
}
Edit0
]
Clears all annotations on the output.
Cannot be undone.
Undo last annotation
E
1EDIT
}
Edit1
]
Undoes the last annotation. Seven
states are held in memory.
Redo annotation
E
2EDIT
}
Edit2
]
Previously removed annotation is
placed on the output.
Annotation display
Set output to show
annotation
EX@
ASHW
}
Ashw
X@]
Set which video outputs display
annotations.
View font
E
ASHW
}
X@]
View setting.
Cursor display
Set output to show cursor
EX@
CSHW
}
Cshw
X@]
Set which video outputs display the
cursor.
View font
E
CSHW
}
X@]
View setting.
On-screen clock
Enable on-screen clock
EX5^
TIME
}
Time
X5^]
Display the time on the video output.
View settings
E
TIME
}
X5^]
View setting.
On-screen clock horizontal position
Specific value
E
K
X1^
HCTR
}
HctrK
X1^]
Set horizontal position to
X1^
.
Increment to right
E
K+HCTR
}
HctrK
X1^]
Shift clock right.
Increment to left
E
K-HCTR
}
HctrK
X1^]
Shift clock left.
View settings
E
KHCTR
}
X1^]
Horizontal position value is
X1^
.
On-screen clock vertical position
Specific value
E
K
X1^
VCTR
}
VctrK
X1^]
Set vertical centering to
X1^
.
Increment up
E
K+VCTR
}
VctrK
X1^]
Shift clock down.
Increment down
E
K-VCTR
}
VctrK
X1^]
Shift clock up.
View settings
E
KVCTR
}
X1^]
Vertical position value is
X1^
.
NOTE:
X@ = Output selection: 0 = all outputs (default), 1 = program only (BNC, MTP, optional output card),
2 = preview only (VGA), 3 = none
X1) = off/disable (0), on/enable (1)
X1^ = H or V position: (zero location is 2048, and limits are ± the output resolution)
X5$ = Line weight/eraser/highlighter width: 1 to 63 pixels wide (default = 8)
X5^ = On-screen clock: 0 = disabled (default), 1 = date and time, 2 = time only, 3 = date only.
Annotator • SIS Communication and Control
52