GE Industrial Solutions A Series Lighting Control Panelboards Programmer User Guide - Manual (Page 43)

A Series ® Lighting Controller LCD Programmer
Chapter 11 – Breaker Override Menu
39
The Breaker Override menu is used to view and edit
the override binary variable. These variables can be
used to manually turn the breakers and groups on and
off. These variables are referred in the I/O menu with
the even and odd breakers as the override inputs.
Similarly, they can be used as switch inputs for the
outputs of the groups.
Viewing Override Objects
1. Navigate to the Breaker Override menu:
2. Press OK to view the first breaker’s override status.
Use the arrow keys to scroll through the remaining
override binary variable objects:
Editing Override Objects
1. Navigate to the Breaker Override menu:
2. Press OK to view the first breaker’s override status.
Use the arrow keys to scroll to a specific override
binary variable object:
3. Press OK and then the A/M key to change to
manual mode:
4. Use the upper arrow key to change to Override
mode. (Override mode turns the variable on,
normal mode turns the variable off.)
5. Press ESC to return to normal mode.
Note that once the breaker is in override mode, it must
be returned to normal mode before it can be switched
again to override mode.
Flashing
Flashing