GE Industrial Solutions A Series Lighting Control Panelboards Programmer User Guide - Manual (Page 32)

A Series ® Lighting Controller Programmer
Chapter 8 – Lighting Group Menu
28
Photocell
The Photocell menu is used to control the lighting
group On or Off via a photocell (light level). The
Photocell input reference can be local or remote
AV/AI/BV/MI/MV/BI. BI and MV references should be
ignored.
Viewing the Photocell Input
1. Navigate to the desired lighting group submenu
and press
OK .
2. Press the Fn key and navigate to the Photocell
submenu using the arrow keys.
3. Press OK to display either of the following:
• If there are no inputs, the LCD screen displays
the following:
• If there is an input, the input type, input name,
and instance number are displayed:
4. Use the arrow keys to view whether Lights On and
Lights Off are enabled.
or
5. Press ESC to return to the Photocell submenu or
use the following procedure to edit the Photocell
input.
Editing the Photocell Input
When editing the Photocell input, MI, AV, BV, and AI
can be selected, depending upon the requirement.
1. Navigate to Photocell menu:
2. Press OK to display the photocell reference. (This
example shows an analog photocell.)
If there is no photocell reference, the following is
displayed:
3. Press OK and use the arrow keys to select the object
type (AI, MI, BV and AV). BI and MV should be
ignored.
4. When the desired object type is selected, press OK.
The type of object will flash.
Instance
No.
Input
Name