GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 18)

Operating variable Unit
DR-20 Motor Angle
DR-30 DC Link Voltage V
DR-32 Brake Energy /s kW
DR-33 Brake Energy /2 min kW
DR-34 Heatsink Temp. C
DR-35 Drive Thermal %
DR-36 Drive Nominal Current A
DR-37 Drive Max. Current A
DR-38 Logic Controller State
DR-39 Control Card Temp. C
DR-40 Trending Buffer Full
DR-50 External Reference
DR-51 Pulse Reference
DR-52 Feedback[Unit] [Unit]
DR-53 Digi Pot Reference
DR-60 Digital Input bin
DR-61 Terminal 53 Switch Setting V
DR-62 Analog Input 53
DR-63 Terminal 54 Switch Setting V
DR-64 Analog Input 54
DR-65 Analog Output 42 [mA] [mA]
DR-66 Digital Output [bin] [bin]
DR-67 Freq. Input #29 [Hz] [Hz]
DR-68 Freq. Input #33 [Hz] [Hz]
DR-69 Pulse Output #27 [Hz] [Hz]
DR-70 Pulse Output #29 [Hz] [Hz]
DR-71 Relay Output [bin]
DR-72 Counter A
DR-73 Counter B
DR-80 Fieldbus CTW 1 hex
DR-82 Fieldbus REF 1 hex
DR-84 Comm. Option STW hex
DR-85 Drive Port CTW 1 hex
DR-86 Drive Port REF 1 hex
DR-90 Alarm Word
DR-92 Warning Word
DR-94 Ext. Status Word
Table 2.1 Measurements
Status screen I
This read-out state is standard after start-up or initiali-
zation.
Press [Info] to obtain information about the measurement
links to the displayed operating variables (1.1, 1.2, 1.3, 2
and 3).
See the operating variables shown in Illustration 2.10.
Illustration 2.10 Status screen I
Status screen II
See the operating variables (1.1, 1.2, 1.3 and 2) shown in
Illustration 2.11.
In the example, speed, motor current, motor power and
frequency are selected as variables in the first and second.
Illustration 2.11 Status screen II
Status screen III
This state displays the event and action of the Logic
Controller. For further information, see 3.19 LC-## Logic
Controller.
Illustration 2.12 Status screen III
2.1.5 Parameter Set-Up
The frequency converter can be used for practically all
assignments, which is why the number of parameters is
quite large. The frequency converter offers a choice
between two programming modes - a Main Menu and a
Quick Menu mode.
The former provides access to all parameters. The latter
takes the user through a few parameters making it
possible to start operating the frequency converter.
Change a parameter in either Main Menu mode or Quick
Menu mode.
How to Program AF-650 GP Programming Guide
DET-618C 17
2 2