GE Industrial Solutions AF-650 GP General Purpose Drive Programming Guide - Manual (Page 106)

EN-94 Broadcast Storm Protection
Range: Function:
-1 % * [-1 -
20 %]
The built-in switch is capable of protecting the
switch system from receiving too many
broadcast packages, which can use up network
resources. The value indicates a percentage of
the total bandwidth that is allowed for broadcast
messages.
Example:
The “OFF” means that the filter is disabled - all
broadcast messages passes through. The value
“0%” means that no broadcast messages passes
through. A value of “10%” means that 10% of
the total bandwidth is allowed for broadcast
messages, if the amount of broadcast messages
increases above the 10% threshold, they will be
blocked.
-1 % * [-1 -
20 %]
EN-95 Broadcast Storm Filter
Option: Function:
Applies to EN-94 Broadcast Storm
Protection; if the Broadcast Storm
Protection should also include
Multicast messages.
[0] * Broadcast only
[1] Broadcast &
Multicast
EN-98 Interface Counters
Range: Function:
4000 * [0 - 4294967295] Read only. Advanced Interface
counters, from built-in switch, can be
used for low-level troubleshooting,
The parameter shows a sum of port
1+port 2.
EN-99 Media Counters
Range: Function:
0 * [0 - 4294967295] Read only. Advanced Interface counters,
from built-in switch, can be used for low-
level troubleshooting, The parameter
shows a sum of port 1+port 2.
Parameter Descriptions AF-650 GP Programming Guide
DET-618C 105
3 3