EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 87)

Inserting Growing Clips into Playlists
Growing clips can be inserted in playlists in the same way as other clips. However, their
display has the following characteristics:
Display:
• They will be displayed with the ‘Creating’ message in the playlist on the VGA.
• The growing clips ID will be blinking on the mini playlist display and on the playlist
screen on the Remote Panel, as well as on the OSD.
Remaining time:
• The remaining time in playlists containing growing clips with only an IN point is
displayed as --:--:-- on the screens (OSD, VGA, Remote Panel screen) where this
information is shown.
5.6.2. Deleting and Moving Playlist Elements
Introduction
Just as you can add clips into a playlist only with the Remote Panel, deleting clips from a
playlist or moving clips within a playlist are also performed via the Remote Panel.
How to Delete an Element from a Playlist
To delete a playlist element in a playlist, proceed as follows:
1. While you are in Playlist Edit mode, scroll within the playlist to the element that needs
to be deleted.
If the Browse mode is active, the first frame will appear on the display as each clip is
scrolled through.
2. Select Delete from the Playlist Edit menu.
The selected element will be removed from the playlist. A confirmation message will
appear if the Confirm Ins/Del clips parameter has been enabled in the Operational Setup
menu (p.3.2 F1).
OPERATION MANUAL Nano 11.02
5. Playlist Management 79