EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 71)

FX Dur
The FX Dur function (C key) sets the duration of the transition effect. The default value
that initially appears is determined by the value set in the Setup menu. The effect duration
will affect the transition at the beginning of the selected clip. Use the lever to to adjust the
value, then press ENTER to confirm.
Effect
The Effect function (SHIFT+C key) is used to select the type of transition effect
(Mix/Wipe/Cut/Fade). Move the lever to set the type of effect, when Effect is highlighted.
Press ENTER to validate.
Delete
The Delete function allows the operator to quickly edit a playlist by removing the selected
clip. The clip that has been «cut» can then be inserted into another location. This clip is
displayed on the second PRV output. To insert it at another position in the playlist, simply
go to that position using the jog dial and press the Insert key (or TAKE).
Secondary Menu Functions
Replace
The Replace function makes it possible to replace a portion of a playlist by the same A/V
material to which effects have been added (externally or internally). This consolidates the
effects within the playlist.
Undo/Redo
The last modifications of a playlist can be undone/redone for as long as the operator does
not exit the Playlist mode (e.g.: returning to Live).
Pressing the Undo command (D key) will undo the last modification. Up to 9 modifications
can be undone. Once a modification has been undone, it is possible to redo it by pressing
the Redo key (C key).
OtherAng
The OtherAng (Other Angle) function (SHIFT+C key) allows the operator to replace the
current playlist element by another playlist element showing a different angle of the
recorded material.
When the OtherAng option is selected, Multicam loads the local and network trains that
include the TC IN of the playlist element to replace. The trains are loaded on the PRV
channel, at the current TC of the loaded element. The jog is used to shift from one record
train to the other.
Once the requested record train is displayed on the PRV channel, pressing ENTER
replaces the current playlist element by the one created from the selected angle.
OPERATION MANUAL Nano 11.02
5. Playlist Management 63