EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 44)

>Archive
Push Aux Clip PostRoll
>Archive Cam
The Archive function allows the operator to flag a clip to place it in the archive queue of the
Xtract
This function is blinking when the clip is flagged for archiving, but has not yet been
archived. It is permanently highlighted when the archiving of the clip is completed.
Depending on the mode selected with the D key (CLIP/CAM), the >ARCHIVE flag is
assigned only to the camera angles of the clip loaded on the controlled channels (CAM
mode), or to all camera angles of the clip (CLIP mode).
Aux Clip
Push Aux Clip PostRoll
>Archive Cam
This function allows assigning a clip as auxiliary audio clip to the current playlist. Press
CLEAR+Aux Clip (CLEAR+SHIFT+B) to remove the current auxiliary clip. "Playlist
Management" on page 59 for more details.
PostRoll
Push Aux Clip PostRoll
>Archive Cam
This function enables/disables the post-roll mode. "1PGM+PRV Secondary Menu
Controls" on page 23 for more explanations about this mode.
Clip/Cam
Push Aux Clip PostRoll
>Archive Cam
Pressing the D key will toggle between CAM and CLIP modes on the remote. Please note
that this mode on the remote and on the VGA screens is never synchronized.
• In CAM mode, the Push, and Archive functions will apply only to the camera angles of
the clip loaded on the controlled channels.
• In CLIP mode, these functions will apply on all camera angles of the clip.
36 4. Clip Management
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013