EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 49)

Command Description
ALT+Z:>ARCHIVE Allows the operator to flag a clip to place it in the archive queue of
the Xtract defined in the Operational Setup menu (p.7.1 F1) or in
the Setup screen.
When a clip is flagged for archiving, but has not yet been
archived, its ID will be blinking green in the Clip screen. It is
permanently highlighted green when the archiving of the clip is
completed.
Depending on the mode selected with the F2 key (CLIP/CAM),
the >ARCHIVE flag is assigned only to the camera angle of the
clip selected with the green cursor (CAM mode), or to all camera
angles of the clip (CLIP mode).
PGM X Located in the bottom right corner of the clip screen, this field is
only visible if the Call channel VGA function has been enabled in
the Operational Setup menu (p.9.2 F4) or in the Setup Screen,
and is only effective in CAM mode, not in CLIP mode. It allows
the operator to select on which channel clips called using the
keyboard/tablet and VGA should be loaded.
Press ALT+F1 on the keyboard to select PGM1, ALT+F2 for
PGM2/PRV. This function is useful to load clips on channels that
cannot be controlled by an EVS Remote Panel, or to allow an AP
to browse clips on a play channel not used by the main operator.
Note that if that channel is in PLST EDIT mode with a PRV, the
clip will automatically cue up on the PRV.
OPERATION MANUAL Nano 11.02
4. Clip Management 41