EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 41)

Clip Hierarchy Diagram
The following diagram represents the hierarchy of the Multicam clip numbering system.
As an example, clip number “112” is used:
Clip LSM ID
The clip numbering system is as follows:
In the above example, the
• “5” refers to the clip page number (1 to 10).
• “4” refers to the clip bank (1 to 9)
• “7” refers to the clip number (1 to 10) inside the bank
• "B" refers to the camera name.
OPERATION MANUAL Nano 11.02
4. Clip Management 33