EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 101)

How to Add and Remove an Auxiliary Audio Clip
To add/remove an auxiliary audio clip to a playlist on the Remote Panel, proceed as
follows:
1. Activate the Aux.Clip button by selecting a clip from the clip bank.
◦ This can be done outside of the PLST EDIT mode, or in PLST EDIT mode with
PRV CTRL ON.
◦ The Aux Clip option appears in the secondary menu on the Remote Panel.
2. Press MENU to call the secondary menu.
3. Press Aux.Clip button (SHIFT+B).
◦ The ID of the Aux Clip appears in the title bar of the Playlist screen (F10)
4. To remove the current aux. clip:
◦ Load the aux clip.
◦ Pressing MENU to open the secondary menu.
◦ Press CLEAR+SHIFT+B (Aux. Clip) on the Remote Panel.
OPERATION MANUAL Nano 11.02
5. Playlist Management 93