EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 73)

5.4. Playlist Functions on the VGA
5.4.1. VGA Playlist Screen
Introduction
Pressing F10 on the keyboard calls the VGA Playlist screen. The Playlist screen displays
information on the clips included in the current or loaded playlist. Several transport
functions are available from this screen. "Clip Functions on the VGA" on page 37 for more
information.
Display Depending on the Load Playlist Setting
When the Load Playlist parameter is set to ‘Conditional’ in the Operational Setup menu on
the Remote Panel (P3.3 F2), the information displayed on the VGA Playlist Screen will
differ depending on whether a playlist is loaded on the PGM1 or not:
If a playlist is loaded on the PGM1:
• All the information displayed on the Playlist Screen refers to the loaded playlist.
• The PLAY, SKIP, NEXT and RECUE commands are displayed on the blue-
highlighted section at the bottom of the page.
OPERATION MANUAL Nano 11.02
5. Playlist Management 65