Adding an auxiliary audio clip, Introduction – EVS XTnano Version 11.02 - July 2013 Operation Manual User Manual
Page 100

•
The External Loop allows you to select on which channel you will physically re-record
the output of your PGM. The link is physical: it is necessary to make the video link
manually with a router or video/audio cables; it is not done inside the server.
Additional parameters are available for the external loop:
•
With the Cam A function (SHIFT+C), you can select the camera the PGM will be
recorded to for the external LOOP process. Press SHIFT+C until the desired camera
is selected.
•
With the +2fields function (SHIFT+D), you can select by how much the video coming
back to your record channel will be delayed. If you are using a DVE, it could introduce
a delay. This system is based on the assumption that audio and video are in sync
when they hit the record channel. The delay value cannot be negative.
Select SHIFT+D to highlight the delay value; the display allows you to add frames or
fields of delay to the delay value. Press either MENU or SHIFT+D to leave this mode.
5.7.4.
Adding an Auxiliary Audio Clip
Introduction
This option allows adding a new stereo audio track (e.g. sport comments, music, jingles,
ambient sound) to the original video clips. This is only available from the Remote Panel.
This stereo audio track is available on the PVW output and on analogue outputs 7/8 or on
digital outputs 15/16. The selection of the track output is done with the Audio slow motion
parameter in the Operational Setup menu (p.8.1 F1).
The original audio tracks are still available on outputs 1/2 (3/4). The auxiliary audio clip
selected is always played back with normal speed (100%), whatever the selected
playback speed for the video.
When the playback of the playlist is not started from the beginning, the system calculates
the offset between the current position and the beginning of the playlist, and applies the
same offset to the Aux. Clip, so that it can remain synchronized with the playlist.
If the duration of the Aux Clip is longer than the playlist duration, the auxiliary audio clip
keeps playing even after the video has stopped. Otherwise, the audio clip ends itself
before the end of the playlist, when the audio clip reaches its OUT point.
92
5. Playlist Management
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013