EVS XTnano Version 11.02 - July 2013 Operation Manual - Manual (Page 43)

Secondary Menu Without Keyword File Defined
1 2 3
111A
Push Aux Clip PostRoll
>Archive Search Cam
In this mode of the secondary menu, clips can still be directly recalled using the F1-F10
keys of the Remote Panel.
4.2.2. Remote Panel Functions
Secondary Menu in Clip Mode
Push
Push Aux Clip PostRoll
>Archive Cam
The Push function allows you to easily send a copy of a clip to another machine on the
network, via the GigE network.
• If one or two default targets (push machines) are defined in the setup, the clip will be
automatically sent to these machines.
• If no default target is defined, the list of machines available on the network will appear.
As soon as the operator selects one of them, the clip is pushed.
In both cases, a message appears for a few seconds on the LCD to confirm that the clip is
being pushed and indicate the clip location where it will be stored on the receiving
machine.
If the Receive Page(s) defined on the destination machine is (are) full, the operator who
tries pushing the clip is notified. While this message is being displayed, the operator can
press the MENU key at any time to return to the normal menu. Depending on the
CAM/CLIP mode selected by the D key, only the camera angles loaded on the controlled
channels are pushed (CAM mode), or all camera angles of the clip are pushed at once
(CLIP mode).
OPERATION MANUAL Nano 11.02
4. Clip Management 35