ZyXEL Communications NWA3550 - Manual (Page 99)

Chapter 7 Wireless Configuration
NWA3550 User’s Guide
99
Figure 51 Wireless: Access Point
The following table describes the general wireless LAN labels in this screen.
Table 22 Wireless: Access Point
LABEL DESCRIPTION
WLAN Interface Select which WLAN adapter you want to configure.
It is recommended that you configure the first WLAN adapter for AP functions and
use the second WLAN adapter for bridge functions.
Operating Mode Select Access Point from the drop-down list.
802.11 Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to
associate with the ZyXEL Device.
Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to
associate with the ZyXEL Device.
Select 802.11b+g to allow both IEEE802.11b and IEEE802.11g compliant WLAN
devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL
Device might be reduced.
Select 802.11a to allow only IEEE 802.11a compliant WLAN devices to associate
with the ZyXEL Device.
Super Mode Select this to improve data throughput on the WLAN by enabling fast frame and
packet bursting.