ZyXEL Communications NWA3550 - Manual (Page 114)

Chapter 8 Wireless Security Configuration
NWA3550 User’s Guide
114
Figure 59 Security: 802.1x Only
The following table describes the labels in this screen.
8.3.3 Security: 802.1x Static 64-bit, 802.1x Static 128-bit
Select 8021x-Static64 or 8021x-Static128 in the Security Mode field to display the following
screen.
Table 28 Security: 802.1x Only
LABEL DESCRIPTION
Profile Name Type a name to identify this security profile.
Security Mode Choose 8021x-Only in this field.
ReAuthentication
Timer
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time interval is
1800 seconds (30 minutes). Alternatively, enter “0” to turn reauthentication off.
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
Idle Timeout The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the user
name and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.