ZyXEL Communications NWA3550 - Manual (Page 198)

Chapter 16 Log Screens
NWA3550 User’s Guide
198
16.3 Example Log Messages
This section provides descriptions of some example log messages.
SMTP Authentication If you use SMTP authentication, the mail receiver should be the owner of the
SMTP account.
User Name If your e-mail account requires SMTP authentication, enter the username
here.
Password Enter the password associated with the above username.
Syslog Logging Syslog logging sends a log to an external syslog server used to store logs.
Active Click Active to enable syslog logging.
Syslog IP Address Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
Log Facility Select a location from the drop down list box. The log facility allows you to log
the messages to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Send Log
Log Schedule This drop-down menu is used to configure the frequency of log messages
being sent as E-mail:
•
Daily
• Weekly
• Hourly
• When Log is Full
• None.
If the Weekly or the Daily option is selected, specify a time of day when the
E-mail should be sent. If the Weekly option is selected, then also specify
which day of the week the E-mail should be sent. If the When Log is Full
option is selected, an alert is sent when the log fills up. If you select None, no
log messages are sent.
Day for Sending
Log
This field is only available when you select Weekly in the Log Schedule field.
Use the drop down list box to select which day of the week to send the logs.
Time for Sending
Log
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00
pm) to send the logs.
Clear log after
sending mail
Select the check box to clear all logs after logs and alert messages are sent
via e-mail.
Log Select the categories of logs that you want to record.
Send Immediate
Alert
Select the categories of alerts for which you want the ZyXEL Device to
immediately send e-mail alerts.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to reconfigure all the fields in this screen.
Table 65 Log Settings
LABEL DESCRIPTION
Table 66 System Maintenance Logs
LOG MESSAGE DESCRIPTION
Time calibration is
successful The router has adjusted its time based on information from the time
server.
Time calibration failed The router failed to get information from the time server.