ZyXEL Communications NWA3550 - Manual (Page 157)

Chapter 13 Remote Management Screens
NWA3550 User’s Guide
157
13.8 Configuring WWW
To change your ZyXEL Device’s World Wide Web settings, click REMOTE MGNT >
WWW.
Figure 89 Remote Management: WWW
The following table describes the labels in this screen.
Table 49 Remote Management: WWW
LABEL DESCRIPTION
WWW
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
HTTPS
Server Certificate Select the Server Certificate that the ZyXEL Device will use to identify itself. The
ZyXEL Device is the SSL server and must always authenticate itself to the SSL
client (the computer which requests the HTTPS connection with the ZyXEL
Device).
Authenticate
Client Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself with the ZyXEL Device by sending the ZyXEL Device a
certificate. To do that the SSL client must have a CA-signed certificate from a CA
that has been imported as a trusted CA on the ZyXEL Device (see the appendix on
importing certificates for details).
Server Port The HTTPS proxy server listens on port 443 by default. If you change the HTTPS
proxy server port to a different number on the ZyXEL Device, for example 8443,
then you must notify people who need to access the ZyXEL Device web
configurator to use "https://ZyXEL Device IP Address:8443" as the URL.