ZyXEL Communications NWA3550 - Manual (Page 164)

Chapter 13 Remote Management Screens
NWA3550 User’s Guide
164
13.10.1 Supported MIBs
The ZyXEL Device supports MIB II, which is defined in RFC-1213 and RFC-1215, as well as
the proprietary ZyXEL private MIB. The purpose of the MIBs is to let administrators collect
statistical data and monitor status and performance.
13.10.2 SNMP Traps
The ZyXEL Device can send the following traps to the SNMP manager.
Table 50 SNMP Traps
TRAP NAME
OBJECT IDENTIFIER #
(OID)
DESCRIPTION
Generic Traps
coldStart 1.3.6.1.6.3.1.1.5.1 This trap is sent after booting (power on). This
trap is defined in RFC-1215.
warmStart 1.3.6.1.6.3.1.1.5.2 This trap is sent after booting (software
reboot). This trap is defined in RFC-1215.
linkDown 1.3.6.1.6.3.1.1.5.3 This trap is sent when the Ethernet link is
down.
linkUp 1.3.6.1.6.3.1.1.5.4 This trap is sent when the Ethernet link is up.
authenticationFailure
(defined in RFC-1215)
1.3.6.1.6.3.1.1.5.5 The device sends this trap when it receives
any SNMP get or set requirements with the
wrong community (password).
Note: snmpEnableAuthenTraps, OID
1.3.6.1.2.1.11.30 (defined in RFC 1214 and
RFC 1907) must be enabled on in order for
the device to send authenticationFailure
traps. Use a MIB browser to enable or disable
snmpEnableAuthenTraps.
Traps defined in the
ZyXEL Private MIB.
whyReboot 1.3.6.1.4.1.890.1.5.13.0.1 This trap is sent with the reason for restarting
before the system reboots (warm start).
"System reboot by user!" is added for an
intentional reboot (for example, download
new files, CI command "sys reboot").
If the system reboots because of fatal errors,
a code for the error is listed.
pwTrapWirelessStatus 1.3.6.1.4.1.890.1.9.2.1.1 This is to enable or disable the wireless group
trap.
pwWlanStaAssociation 1.3.6.1.4.1.890.9.2.3.1.1 This trap is sent when a wireless station
associates with the ZyXEL Device.
pwWlanStaDisassociation 1.3.6.1.4.1.890.9.2.3.1.2 This trap is sent when a wireless station
disconnects from the ZyXEL Device.
pwTrapSecurityStatus 1.3.6.1.4.1.890.1.9.2.1.2 This is to enable or disable the security group
trap.
pwWlanStaAuthFail 1.3.6.1.4.1.890.9.2.3.2.1 This trap is sent when a wireless station fails
to authenticate with the ZyXEL Device.