ZyXEL Communications NWA3550 - Manual (Page 61)

Chapter 5 Tutorial
NWA3550 User’s Guide
61
This Select SSID Profile table allows you to activate or deactivate SSID profiles. Your
wireless network was previously using the SSID04 profile, so select SSID04 in one of the
Profile list boxes (number 3 in this example).
Select the Active box for the entry and click Apply to activate the profile. Your standard
wireless network (SSID04) is now accessible to your wireless clients as before. You do not
need to configure anything else for your standard network.
5.2.2 Configure the VoIP Network
Next, click WIRELESS > SSID. The following screen displays. Note that the SSID04 SSID
profile (the standard network) is using the security01 security profile. You cannot change this
security profile without changing the standard network’s parameters, so when you set up
security for the VoIP_SSID and Guest_SSID profiles you will need to set different security
profiles.
Figure 19 Tutorial: WIRELESS > SSID
The Voice over IP (VoIP) network will use the pre-configured SSID profile, so select
VoIP_SSID’s radio button and click Edit. The following screen displays.