beautypg.com

ZyXEL Communications NWA3550 User Manual

Page 209

background image

Chapter 17 VLAN

NWA3550 User’s Guide

209

Figure 120 VLAN-Aware Switch - VLAN Status

Follow the instructions in the Quick Start Guide to set up your ZyXEL Device for
configuration. The ZyXEL Device should be connected to the VLAN-aware switch. In the
above example, the switch is using port 1 to connect to your computer and port 2 to connect to
the ZyXEL Device:

Figure 117 on page 208

.

1 In the ZyXEL Device web configurator click VLAN to open the VLAN setup screen.
2 Select the Enable VIRTUAL LAN check box and type a Management VLAN ID (10

in this example) in the field provided.

3 Click Apply.

Figure 121 VLAN Setup

4 The ZyXEL Device attempts to connect with a VLAN-aware device. You can now

access and mange the ZyXEL Device though the Ethernet switch.

"

If you do not connect the ZyXEL Device to a correctly configured VLAN-aware
device, you will lock yourself out of the ZyXEL Device. If this happens, you
must reset the ZyXEL Device to access it again.

EXAMPLE