3 configuring layer-2 isolation, Figure 70 wireless > layer 2 isolation, Table 37 wireless > layer-2 isolation – ZyXEL Communications NWA3550 User Manual

Page 131

Chapter 10 Other Wireless Configuration

NWA3550 User’s Guide

131

Figure 70 WIRELESS > Layer 2 Isolation

The following table describes the labels in this screen.

10.3 Configuring Layer-2 Isolation

To configure layer-2 isolation, click WIRELESS > Layer-2 Isolation > Edit. The screen
appears as shown.

If layer-2 isolation is enabled, you need to know the MAC address of each
wireless client, AP, computer or router that you want to allow to communicate
with the ZyXEL Device's wireless clients.

Table 37 WIRELESS > Layer-2 Isolation

LABEL

DESCRIPTION

Index

This is the index number of the profile.

Profile Name

This field displays the name given to a layer-2 isolation profile in the Layer-2

Isolation Configuration screen.

Edit

Select an entry from the list and click Edit to configure settings for that profile.