ZyXEL Communications NWA3550 - Manual (Page 151)

NWA3550 User’s Guide
151
C
H A P T E R
13
Remote Management Screens
This chapter provides information on the Remote Management screens.
13.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
You may manage your ZyXEL Device from a remote location via:
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Console port
2 SSH
3 Telnet
4 HTTPS and HTTP
13.1.1 Remote Management Limitations
Remote management over LAN or WLAN will not work when:
1 You have disabled that service in one of the remote management screens.
2 The IP address in the Secured Client IP Address field does not match the client IP
address. If it does not match, the ZyXEL Device will disconnect the session
immediately.
3 There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
Table 46 Remote Management Overview
• WLAN • ALL (LAN and WLAN)
• LAN only • Neither (Disable).