ZyXEL Communications NWA3550 - Manual (Page 323)

Appendix F Text File Based Auto Configuration
NWA3550 User’s Guide
323
Use the following procedure to have the AP download the configuration file.
Verifying Your Configuration File Upload Via SNMP
You can use SNMP management software to display the configuration file version currently
on the device by using the following MIB.
Troubleshooting Via SNMP
If you have any difficulties with the configuration file upload, you can try using the following
MIB 10 to 20 seconds after using SNMP to have the AP download the configuration file.
Configuration File Format
The text based configuration file must use the following format.
Figure 256 Configuration File Format
The first line must be !#ZYXEL PROWLAN.
The second line must specify the file version. The AP compares the file version with the
version of the last configuration file that it downloaded. If the version of the downloaded file is
the same or smaller (older), the AP ignores the file. If the version of the downloaded file is
larger (newer), the AP uses the file.
Table 102 Configuration via SNMP
STEPS MIB VARIABLE VALUE
Step 1 pwTftpServer Set the IP address of the TFTP server.
Step 2 pwTftpFileName Set the file name, for example, g3000hcfg.txt.
Step 3 pwTftpFileType Set to 3 (text configuration file).
Step 4 pwTftpOpCommand Set to 2 (download).
Table 103 Displaying the File Version
ITEM OBJECT ID DESCRIPTION
pwCfgVersion 1.3.6.1.4.1.890.1.9.1.2 This displays the current configuration file version.
Table 104 Displaying the File Version
ITEM OBJECT ID DESCRIPTION
pwTftpOpStatus 1.3.6.1.4.1.890.1.9.1.6 This displays the current operating status of the TFTP
client.
!#ZYXEL PROWLAN
!#VERSION 12
wcfg security 1 xxx
wcfg security save
wcfg ssid 1 xxx
wcfg ssid save