1 change the operating mode, Figure 16 tutorial: example mbssid setup, Table 3 tutorial: example information – ZyXEL Communications NWA3550 User Manual
Page 59: Internet, Ab z
Chapter 5 Tutorial
NWA3550 User’s Guide
59
Figure 16 Tutorial: Example MBSSID Setup
The standard network (SSID04) has access to all resources. The VoIP network (VoIP_SSID)
has access to all resources and a high Quality of Service (QoS) setting (see
for information on QoS). The guest network (Guest_SSID) has access to the Internet and
the network printer only, and a low QoS setting.
To configure these settings, you need to know the MAC (Media Access Control) addresses of
the devices you want to allow users of the guest network to access. The following table shows
the addresses used in this example.
5.2.1 Change the Operating Mode
Log in to the ZyXEL Device (see
). Click WIRELESS > Wireless. The
Wireless screen appears. In this example, the ZyXEL Device is using WLAN Interface 1 in
Access Point operating mode, and is currently set to use the SSID04 profile.
Table 3 Tutorial: Example Information
Network router (A) MAC address
00:AA:00:AA:00:AA
Network printer (B) MAC address
AA:00:AA:00:AA:00
Internet
VoIP_SSID
SSID04
Guest_SSID
A
B
Z