ZyXEL Communications NWA3550 - Manual (Page 167)

Chapter 13 Remote Management Screens
NWA3550 User’s Guide
167
13.11.2.1 The SNMPv3 User Profile Screen
Use this screen to set up the details of SNMPv3 users. Click Configure SNMPv3 User
Profile in the REMOTE MGNT > SNMP screen. The following screen displays.
Figure 99 Remote Management: SNMPv3 User Profile
The following table describes the labels in this screen.
SNMP
Service Port You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Service Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 52 Remote Management: SNMP
LABEL DESCRIPTION
Table 53 Remote Management: SNMP User Profile
LABEL DESCRIPTION
Enable
SNMPv3Admin
Select this box to activate the SNMPv3 administration account. The SNMPv3
administrator can issue Get and Set commands to the ZyXEL Device.
User Name Enter a username for the SNMPv3 administrator. Only SNMP commands
carrying this username are allowed to administer the ZyXEL Device.
Password Enter a password for the SNMPv3 administrator. Only SNMP commands
carrying this password are allowed to administer the ZyXEL Device.