ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 72)

Chapter 6 Basic Setting
VES-1616F-3x Series User’s Guide
72
6.7 Port Setup
Click Basic Setting and then Port Setup in the navigation panel to display the configuration
screen. Use this screen to configure general VDSL and Ethernet port settings.
Manageable Select this option to allow device management using this IP address setting.
Clear this option to set the switch to block management access using this IP
address.
Add Click Add to save the new rule to the switch. It then displays in the summary table
at the bottom of the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Index This field displays the index number of the rule. Click an index number to edit the
rule.
IP Address This field displays the IP address.
IP Subnet Mask This field displays the subnet mask.
VID This field displays the ID number of the VLAN group.
Default Gateway This field displays the IP address of the default gateway.
Manageable This field displays whether device management on this IP address is allowed.
Delete Check the rule(s) that you want to remove in the Delete column, then click the
Delete button.
Cancel Click Cancel to clear the selected checkboxes in the Delete column.
Table 12 IP Setup (continued)
LABEL DESCRIPTION