ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 211)

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
211
32.2.2.1 Initial Screen
When you turn on your switch, it performs several internal tests as well as line initialization.
You can view the initialization information using the console port. After the initialization, the
login screen displays (refer to
Section 32.3 on page 212 ).
32.2.3 Telnet
Use the following steps to telnet into your switch.
1 For local management, connect your computer to the RJ-45 management port (labeled
MGMT) on the switch.
2 Make sure your computer IP address and the switch IP address are on the same subnet.
In Windows, click Start (usually in the bottom left corner), Run and then type telnet
192.168.0.1 (the default management IP address) and click OK.
3 A login screen displays.
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
initialize mgmt, ethernet address: 00:13:49:01:23:45
initialize switch, ethernet address: 00:13:49:01:23:46
Initializing switch unit 0...
Press ENTER to continue...