ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 241)

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
241
manageable
Allows the switch to be managed using this
specified IP address.
13
default-
gateway
address>
Sets a default gateway IP address for this
VLAN.
13
inband-default Sets a static in-band IP address and subnet
mask.
13
inband-default
dhcp-bootp
Sets the dynamic in-band IP address. 13
inband-default
dhcp-bootp
release
Releases the dynamic in-band IP address. 13
inband-default
dhcp-bootp
renew
Updates the dynamic in-band IP address. 13
name
str>
Specifies a name for identification purposes. 13
no fixed
list>
Sets fixed port(s) to normal port(s). 13
forbidden Sets forbidden port(s) to normal port(s). 13
inactive Enables the specified VLAN. 13
ip address Deletes the IP address and subnet mask in
this VLAN.
13
ip address
default-
gateway
Deletes the default gateway in this VLAN. 13
ip address
inband-default
dhcp-bootp
Sets the default in-band interface to use a
static IP address in this VLAN.
The switch will use the default IP address of
0.0.0.0 if you do not configure a static IP
address.
13
untagged Specifies the port(s) you want to tag all
outgoing frames transmitted with this VLAN
Group ID.
13
normal
list>
Specifies the port(s) to dynamically join this
VLAN group using GVRP
13
untagged Specifies the port(s) you don’t want to tag all
outgoing frames transmitted with this VLAN
Group ID.
13
Table 86 vlan Commands (continued)
COMMAND DESCRIPTION P