ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 254)

Chapter 33 Command Examples
VES-1616F-3x Series User’s Guide
254
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the BPDU control to
tunnel , to forward BPDUs received on ports one, three, four
and five.
33.9.3 broadcast-limit
Syntax:
broadcast-limit
broadcast-limit
where
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set the number of broadband packets the interface receives per second.
33.9.4 bandwidth-limit
Syntax:
bandwidth-limit
bandwidth-limit egress
bandwidth-limit ingress
where
An example is shown next.
• Enable port one for configuration.
• Enable bandwidth control.
• Set the outgoing traffic bandwidth limit to 7Mbps.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# bpdu-control tunnel
sysname(config-interface)#
Enables broadcast storm control limit on the switch.
Sets how many broadcast packets the interface receives per second.
sysname(config)# interface port-channel 1
sysname(config-interface)# broadcast-limit
sysname(config-interface)# broadcast-limit 21
Enables bandwidth control on the switch.
Sets the maximum bandwidth allowed for outgoing traffic (egress) or
incoming traffic (ingress) on the switch.