ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 218)

Chapter 32 Introducing the Commands
VES-1616F-3x Series User’s Guide
218
32.11.2 Enable Mode
The following table describes the commands available for Enable mode.
show hardware-monitor Displays current hardware monitor information with the
specified temperature unit (Celsius C or Fahrenheit F).
0
hardware-version Displays whether the Switch is a VDSL1 (100100 or
10050) or VDSL2 device (5030).
0
ip Displays the IP settings. 0
system-information Displays general system information. 0
ssh <1|2> <[user@]dest-ip> Connects to an SSH server with the specified SSH
version.
0
traceroute
[in-band|out-of-band|vlan
]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device. 0
help Displays the command help information. 0
Table 79 Command Summary: User Mode (continued)
COMMAND DESCRIPTION P
Table 80 Command Summary: Enable Mode
COMMAND DESCRIPTION P
baudrate <1|2|3|4|5> Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5 (115200).
13
boot config Restarts the system. 13
configure Accesses Configuration mode. See
Section 32.11.3 on page 223 .
13
copy running-config tftp Backs up running configuration to the
specified TFTP server with the
specified file name.
13
tftp config
file>
Restores configuration with the
specified filename from the specified
TFTP server.
13
flash Restores firmware via TFTP. 13
disable Exits Enable (or privileged) mode. 13
enable Accesses Enable (or privileged)
mode.
13
erase running-config Resets to the factory default settings. 13
exit Exits Enable (or privileged) mode. 13
help Displays help information. 13
history Displays a list of command(s) that you
have previously executed.
13
igmp-flush Clears all IGMP information. 13