ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 244)

Chapter 33 Command Examples
VES-1616F-3x Series User’s Guide
244
33.2.2 show ip
Syntax:
show ip
This command displays the IP related information (such as IP address and subnet mask) on all
switch interfaces.
The following figure shows the default interface settings.
33.2.3 show logging
Syntax:
show logging
This command displays the system logs. The following figure shows an example.
If you clear a log (by entering y at the Clear Error Log (y/n): prompt), you cannot view
it again.
33.2.4 show mac address-table all
Syntax:
show mac address-table all
Where
sysname> show ip
Out-of-band Management IP Address = 192.168.0.1
Management IP Address
IP[192.168.0.1], Netmask[255.255.255.0], VID[0]
IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1]
sysname# show logging
56 Thu Jan 1 00:01:04 1970 PSSV -WARN SNMP TRAP 0: cold start
57 Thu Jan 1 00:01:04 1970 PSSV WARN System cold start
58 Thu Jan 1 00:01:04 1970 PP1f -WARN SNMP TRAP 26: Event On Trap
59 Thu Jan 1 00:01:06 1970 PKEB INFO User admin login
60 Thu Jan 1 00:02:46 1970 PP0c -WARN SNMP TRAP 3: port 18 link up
61 Thu Jan 1 00:02:46 1970 PP0c ERROR Port 18 link up
62 Thu Jan 1 00:03:23 1970 PP27 INFO User admin logout
63 Thu Jan 1 00:03:28 1970 PKEB INFO User admin login
Clear Error Log (y/n):
= Specifies the sorting criteria (MAC, VID or port).