ZyXEL Communications VDSL SWITCH VES-1616F-3X - Manual (Page 264)

Chapter 34 IEEE 802.1Q Tagged VLAN Commands
VES-1616F-3x Series User’s Guide
264
3 The switch ignores the port from which the frame came, because the switch does not
send a frame to the port from which it came. The switch also does not forward frames to
“forbidden” ports.
4 If after looking at the SVLAN, the switch does not have any ports to which it will send
the frame, it won’t check the port filter.
34.4 Delete VLAN ID
Syntax:
no vlan
where
This command deletes the specified VLAN ID entry from the static VLAN table. The
following example deletes entry 2 in the static VLAN table.
34.5 Enable VLAN
Syntax:
vlan
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.
34.6 Disable VLAN
Syntax:
vlan
inactive
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
34.7 Show VLAN Setting
Syntax:
show vlan
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
= The VLAN ID [1 – 4094].
sysname(config)# no vlan 2