Xerox 490 - Manual (Page 96)

Printer Management Xerox 490/980 Color Continuous Feed Printing System
7-6 Printer & PC GUI Guide
Print Position Adjustment
To change the set value, select left arrow or right arrow to set the horizontal position, and select
up arrow or down arrow to set the vertical position. Select [OK] to set the changed values.
Select [Setting] to set the value, and [Cancel] to cancel the setting.
The allowable setting value is as follows.
• Millimeter (mm): -2.7 to 86.6
• Inch: -0.10 to 3.41
If the setting unit is inch, the value is valid to two places of decimals. If the setting unit is
millimeter, the value is valid to one decimal place.
Display content Function
Adjusts horizontal offset (-).
Adjusts horizontal offset (+).
Adjusts vertical offset (+).
Adjusts vertical offset (-).
Resets the horizontal/vertical offset to 0.
The set offset value is displayed in mm.
The set offset value is displayed in inch.