Xerox 490 - Manual (Page 177)

Xerox 490/980 Color Continuous Feed Printing System Resource Management
Printer & PC GUI Guide 10-21
Print Mark 1
Select the printing mark type. Multiple types may be selected. The default is no selection.
• Page No.: This cannot be changed in this version.
• Offset: The offset mark is printed for each job.
• Job: Three blank sheets are printed in the beginning of each job, and the job mark is
printed at the crease.
• Copy1: The copy-1 mark is printed on each copy.
• Copy2: The copy-2 mark is printed on each copy.
Filter Control
Offset Mark: Select offset mark on/off. When this function is valid, the offset mark is printed on
the page set by the filter.
Recovery Marker Page
Select on/off of the recovery marker page output at the start of printing pages at the time of
job recovery. The default is off.
The output recovery marker page varies with the extended spool setting.
Printed recovery marker page when no extended spool is set (Example)
**********************************************************
*
*
*
*
*
*
*
*
* *
*
*
*
*
*
*
*
*
**********************************************************
Image upon continuous printing Image of non-continuous printing
Final page in job with mark print
setting
Starting page of job without mark
print setting
Final page in job with mark print
setting
Starting page of job without mark
print setting
The mark is fully printed. The lower half of the mark is not
Start Page No. :xxx
JOB Name :xxx
JOB No. :xxx
Recovery Marker Page