Xerox 490 User Manual
Page 121
Xerox 490/980 Color Continuous Feed Printing System
Queue Management
Printer & PC GUI Guide
8-9
•
Data format and output process mode: The output process mode setting varies with the
data format selected on the Properties screen. The relationship between the data format
and output process mode is as shown in the table below.
Recovery Size
This can be set when the stream mode is set. When paper jam or any other
error requiring recovery occurs in the printer, the printing can be restarted from
the previous page specified.
The set value is between 0 and 9,999,999. If 0 is set, all pages are stored in the
output spool.
• Grayed out if Extended Spool is Enable.
• This setting is not enabled if the input process mode is set in the
stream mode.
With this setting, the data stored in the spool is adjusted according to
the used imposition information. The page number may be different
from the one shown in the fault window, from which the printing can
be restarted.
Extended Spool
Enable or disable the extended spool can be set. The job schedule is controlled
according to this setting.
Used Buffer Size
Cannot be set in this version.
Data Format
Output Process Mode
Spool
Stream
PS
Yes
Yes
Yes
Yes
IPDS
No
Yes
Content
Description