Xerox 490 - Manual (Page 95)

Xerox 490/980 Color Continuous Feed Printing System Printer Management
Printer & PC GUI Guide 7-5
Print Density and Position Adjustment
Print density can be set at seven levels. It is set in monochrome mode on the Monochrome and
in color mode on each of the K (black), C (cyan), M (magenta) and Y (yellow). On the Dens/Pos
Adjust tab, monochrome mode density and print position can be adjusted.
The following contents can be adjusted.
• Print position adjustment: The horizontal/vertical offset value can be changed.
• Print density setting: The print density can be changed.
• Operating buttons:
• Setting: The information is updated according to the changes made.
• Cancel: The operation is cancelled and the information before making changes is
shown.
Operation is possible while the printer is stopped.